Line Post Type Porcelain Insulator Pm-25/720

Since its establishment, our company has established the ambitious goal of producing the 110kV station post insulator, 230kV Composite Line Post Insulator, Suspension insulator for electrified railway as the main direction and building a first-class brand of monopoly. Our company's service network provides extensive technical support to customers worldwide. With all the business philosophy that is for the sake of consumers, we are enthusiastic to provide high-quality products and good services to new and old customers. Welcome to negotiate and cooperate. A professional management team and advanced production equipment to make high-quality products are a strong guarantee for us to achieve high-quality products!

Improvements in electrode shape

The average breakdown field strength of uniform electric field and slightly inhomogeneous electric field gap is much higher than that of extremely inhomogeneous electric field gap. Generally speaking, the more uniform the electric field distribution, the higher the average breakdown field strength. Therefore, the electrode shape can be improved and the electrode curvature radius can be increased to improve the electric field distribution and increase the breakdown voltage of the gap. At the same time, the electrode surface should try to avoid burrs, edges, etc. to eliminate the phenomenon of local enhancement of the electric field. If an extremely non-uniform electric field is unavoidable, a symmetrical electric field (rod-rod type) should be used whenever possible.

Even if the electric field is extremely uneven, in many cases, in order to avoid strong corona discharge under the operating voltage, the electrode curvature radius must be increased.

Figure 2-25 shows some methods of changing the shape of the electrode to adjust the electric field. These methods can be summarized as follows: 

(1) Increase the radius of curvature of the electrode: For example, add a spherical shield to the end of the transformer bushing (see Figure 2-25(a)), use expanded diameter wires (the cross-section is the same, the radius is increased, see figure 2-25(b)), etc., use the method of increasing the electrode curvature radius to reduce the surface field strength.

(2) Improve the electrode edge: The electrode edge should be made into an arc, or try to make it as close as possible to an equipotential surface (see Figure 2-25(c)) to eliminate the edge effect.

(3) Make the electrode have the best shape; such as adding a metal flat ball to the high-voltage lead through the wall, and the edge of the wall hole is made into a rotating body similar to a vertical chain line (see Figure 2-25(d)), so as to improve its electric field distribution.

Adjusting the electric field and reducing the local excessively high field strength are effective measures to improve the electric strength not only for the gas gap but also for other insulation structures. For different insulation structures, in addition to improving the electrode shape, other methods of adjusting the electric field can also be used.

solid insulating covering

In a slightly uneven electric field, covering the surface of the high-field-strength electrode with a solid paper insulating layer can also increase the gap breakdown voltage, and the covering layer has a significant effect on increasing the air gap breakdown voltage, but covering the counter electrode with an insulating layer , to improve the air gap breakdown voltage research needs to be further in-depth.

Insulator designed mainly for flexural loads (bending) but also tension and compression, thus having combined loading capability. Normally utilized as a single unit can also be a double insulator assembly. Composite materials are most suitable for the application on compact lines and retrofitting due to their flexibility, overloads absorption capacity and reduced weight. We have thousands of pieces line post from 33kV to 362kV worked on lines all over the world, and there is no single accidents happens. 

We have our own silicone rubber workshop and lab. Each batch of rubber shall be tested and we have our own formula which makes our insulator tracking and earsion performance stable and good. Below is the key parameter of our rubber. 

Our company with strong strength, reasonable price, good service and a number of enterprises to establish a long-term partnership. With high quality products and perfect after-sales service, we have won the consistent reputation of customers all over the country. We sincerely welcome customers from home and abroad to visit, investigate and discuss business cooperation.

We are a professional Line Post Type Porcelain Insulator Pm-25/720 manufacturer integrating development, design, production and sales, and our products reflect the characteristics of the times. We are committed to being a benchmark enterprise, leading the sound development of industry norms. Our company provides the more perfect service for you with the better quality, the higher efficiency, let your each minute investment obtain the most reasonable return.

Hot Tags: composite post insulator, China, manufacturers, suppliers, factory, wholesale, for sale, Composite polymer insulator, Composite Long Rod Insulator, 38kV Composite Fuse Cut Body, Silicone rubber Long rod insulator, 35kV Composite Deadend insulators, polymer pin insulator