69kV Polymeric Line Post Vertical Insulator

69kV Polymeric Line Post Vertical Insulator

Product: Polymer Line Post Insulator P/N: FZSW Standard: IEC 61952 Usage:Power Transmission& Distribution Line, Insulation, Electrical Installation

Product Introduction

69kV Polymeric Line Post Vertical Insulator

Vertical Insulator 

 
Our factory & quipments
 
DSC09325
precision parts processing line
DSC09326
precision parts processing line
DSC09328
our factory appearance

I. Vertical Column Insulator (Vertical Installation)

 

1. Installation Location: Vertically erected on the crossarm, pole top platform, or support plane, with the base facing downwards and the top supporting the conductor, similar to the vertical installation method of a pin insulator.

 

2. Stress Characteristics: Primarily withstands lateral bending moments (conductor wind load, short-circuit electrodynamic lateral thrust); Axial pressure is very low (only the conductor's own weight); The core rod is designed for **cantilever bending strength**, and the base is a single screw/bolt seat, compatible with crossarm flat openings.

 

3. Applicable Scenarios: Conventional distribution poles, cement/steel pipe poles with crossarms; Vertical support for ordinary urban overhead lines, pole-mounted switches, and surge arresters; Vertical support for substation busbars and disconnecting switches (FZSW series vertical support); Replaces traditional porcelain pin insulators and vertical porcelain supports; universal mounting hole positions.

 

4. Structural Features: The bottom features a single screw base, while the top clamp holds the wire upwards; the umbrella skirts are arranged vertically, allowing rainwater to flow quickly down the skirts and reducing dirt accumulation.

 

The drawing

69kv post insulator with vertical clamp

 

Dimensions:

Height: 676±15mm

Min Dry Arcing Distance:517mm

Creepage distance:1453mm

Diameter of the Rod:φ55mm

Number of sheds: 11

 

Raw Materials:

End-fitting material: Cast Iron Or Cast Steel, Hot Dip Galvanized

Minimum Thickness of the Galvanization:86μm

Core Material: Epoxy& Glass Fiber

Diameter:φ55mm

Weather Sheds Material: HTV Silicone.

Color:Gray

 

Mechanical:

· Specified Cantilever Load (SCL): 9.5kN.
· Routine Test Load (RTL): 11.2kN.
· Standard:IEC 61952

 

Rated Voltage:69kV.
· Power Frequency Flashover Voltage (Wet 1 min):175kV.
· Lightning Impulse Flashover Voltage:335 kV.

Hot Tags

69kV Line Post Insulator , High Voltage 69kV Insulator,  69kV Electrical Insulator, 69kV Vertical Insulator, 69kV Horizontal Insulator , Post Polymer Insulator,  Silicone Rubber Post Insulator , Polymeric Insulator , Composite Insulator, Composite Line Post Insulator ,

 

Hot Tags: 69kv polymeric line post vertical insulator, China, manufacturers, suppliers, factory, wholesale, for sale, 138kV Composite Station Post Insulator, 220kV station post insulator, 330kV station post insulator, 69kV Composite Station Post Insulator, Polymer Station Post Insulators

Send Inquiry

whatsapp

teams

E-mail

Inquiry

Bag