Iron Bracket Base For Electrical Line Post Insulator

Bendable Base

A steel base that connects to the insulator with two bolts.
It can be "gain" or "flat," and has either a 0° or 12° angle.
(0° is only for braced post use.)
This type allows a small amount of adjustment.

Fixed Base

A cast-iron base that connects to the insulator with four bolts on a 5" bolt circle.
Unlike the bendable base, it cannot move or adjust.
Available in gain or flat designs, both with a 12° angle.

Gain Base

Used to mount an insulator onto a round pole.
It attaches through the center bolt holes.

Flat Base

Used to mount an insulator onto a flat surface.
It can be installed using either four outer bolt holes or two center bolt holes.