video
145kV 4kN HTV Silicone Composite Insulator in Substation

145kV 4kN HTV Silicone Composite Insulator in Substation

Model NO.:FZSW1-145/4
Design and test standard:IEC 61952
Min Creepage Distance:3830mm
Usage:High Voltage Power Transmission, Insulation, Electrical Installation

Product Introduction

145kV 4kN HTV Silicone Composite Insulator in Substation

 

Composite Insulator in Substation

Rated Voltage Height Dry Arcing Distance Creepage Distance Specified Cantilever Load
(SCL)
Rod No. od sheds Wet Power Frequency Withstand Voltage
(kV)
Lightning Impulse Withstand Voltage
(kV)
145kV 1480±20mm 1325mm 3830mm 4kN 70mm  27  275 650

145KV

 

Products Description

 

Composite Insulator in Substation

In the early years, station post insulators were mostly used for telegraph poles. With the development of science and technology, a lot of disc-shaped insulators were hung at one end of the high-type high-voltage line connection tower, which was to increase the creepage distance.Insulators play two basic roles in overhead transmission lines, that is supporting conductors and preventing current from returning to the ground. These two roles must be guaranteed. Insulators should not fail due to various electromechanical stresses caused by changes in the environment and electrical load conditions, which will damage the operating life of the whole line.

 

Silicone Rubber Housing

Better hydrophobicity
Better hydrophobicity migration performance
Better pollution resistance
Excellent electrical insulation properties
Excellent aging resistance

 

Corrosive Resistance Fiberglass Core
Excellent resistance to high temperature, stress corrosive & acid attack
Better damping Performance
High tensile strength (>1200Mpa)
Excellent creep resistance
Excellent anti-fatigue fracture properties

 

Crimping & Multiple Sealing
High mechanical strength
Small dispersion
Reliable sealing performance between rods and end fittings

Application

900

FAQ

 

1. Are you a factory or trading company?
We are a professional ISO-certified factory.

2. Where is your factory located? How can I visit there?
Our factory is located in Wuhan City,Hubei Province, China.

We also welcome online video inspections of our factory at any time.

 

3. Can customers visit and inspect the factory?

A: Yes. Factory visits, inspections, and third-party audits are warmly welcomed at any time.

 

4.   Do you provide technical support?

A: Yes. We have dedicated technical engineers to provide professional technical consultation before, during, and after sales.

 

hot Tags

 

insulator creepage distance substation, composite insulator electrical utilities, lightning performance polymer insulator , mechanical strength polymer insulator, aging of polymer insulators, hydrophobicity silicone insulators , substaion insulator, polymer substation insulator, polymer substation insulator, composite substation insulator , electrical substation insulator, 

Hot Tags: 145kv 4kn htv silicone composite insulator in substation, China, manufacturers, suppliers, factory, wholesale, for sale, 10kV Composite Pin Insulator, Polymer Station Post Insulators, Spare Parts For Composite Insulators, 220kV station post insulator, Post Insulator 150 Kv, Composite Polymer Deadend Insulators

Send Inquiry

whatsapp

teams

E-mail

Inquiry

Bag